To Next PageTo Next Page
Need help?Do you have a question about the SIMAG SPN 125 and is the answer not in the manual?
Manual content, product overview, and installation guidance.
Criteria for selecting location and how to level the unit.
Details on connecting water supply and drain lines for different models.
Checklist to ensure proper installation before operation.
Visual guide and warnings for installing the ice maker.
Step-by-step procedure for powering on and initiating the ice making process.
Explains how water enters, is processed, and forms ice within the machine.
Details the flow and state changes of the refrigerant within the cooling system.
Describes the sensor that monitors refrigerant temperature in the evaporator.
Explains the main control board and its monitoring LEDs.
Details the sensor that detects motor speed and direction for safety.
Describes the sensor that monitors ice accumulation in the chute.
Procedure for adjusting the water level within the freezing cylinder.
Steps for replacing key parts like sensors, augers, motors, and cylinders.
Electrical schematic for SPN 125 and SPN 255 models.
Electrical schematic for SPN 405 and SPN 605 (single phase) models.
Electrical schematic for SPN 605 three-phase models.
Electrical schematic for the SPN 1205 model.
Troubleshooting units that fail to power on or show abnormal LED patterns.
Diagnosing problems related to drive motor rotation, speed, and compressor cycling.
Addressing low ice output, water shortage, and incorrect water levels.
Scheduled maintenance tasks for the ice maker, including cleaning and checks.
Procedure for cleaning the water system, including sanitization.
General
