SIMAG SVD 152 - COMPONENT DESCRIPTION; FRONT CONSOLE PANEL; P.C. BOARD

26

COMPONENT DESCRIPTION
1. Front Console Panel
SVD SERIES
2.P.C. Board (As above picture)
Located in the control box, this board is the
brain of the system as it governs the ice
machine cyclematic through sensors, relays
and switches. It consists of two separated
printed circuits one at high and the other at low
voltage integrated with a fuse, of seven
connectors for the sensors/switches (as above
picture, of one outlet connector (front LED
display), of one serial port connector, oftwo2-
PIN plug for transformer input and output power,
of two terminals for input power live line and
compressor output, of 3 terminals for power null
line, of one 5-PIN plug for components output,
1
2
3
4
5
LEDNo.1
A
larm high pressure
LEDNo.2
A
larm
LEDNo.3
Bin full.
LEDNo.4
Operation
LEDNo.5
Electrical power supply
Water inlet valve & Water pump & Water
purge valve & Harvest valve & Fan motor
Startup delay
switch
(1008 only)
Condenser
sensor
Bin full sensor
Water level
sensor
Hi-
p
ress.controller
MODE button
Ice thickness
sensor
Factory use onl
y
CLEAN buttonLED displa
y
DIP SwitchTransformersecondar
y
Power in
(
Null line
)

Transformer
p
rimar
y

Fuse
Power in (liver line) Compressor contactor
Serial connector