scorpION3 5200969 Rev 4 39
Weight
0.8 kg (1.8 lb); 1.0 kg (2.1 lb); 1.3 kg (2.8 lb); 1.5 kg (3.2 lb); 2.0 kg (4.3 lb);
2.2 kg (4.9 lb); 2.5 kg (5.5 lb)
Warranty Two year limited warranty
Certifications RoHS 2 Compliant
scorpION3 Bar with Air Assist
Air Inlet ¼” QC Tube Fitting
Input Pressure 200 kPa (30 psi) recommended nominal, 700 kPa (100 psi) max, CDA
Air Consumption
5.1 Nm3/h @ 200 kPa (3 scfm @ 30 psi); 8.5 Nm3/h @ 400 kPa (5 scfm @
60 psi); 13.6 Nm3/h @ 700 kPa (8 scfm @ 100 psi)
Noise Level
76 dB @ 200 kPa (30 psi); 82 dB @ 400 kPa (60 psi); 88 dB @ 700 kPa
(100 psi) measured 600 mm (24”) from bar
Warranty Two year limited warranty
Certifications RoHS 2 Compliant
scorpION AC Adapter
Input Voltage
Universal 100-240 VAC, 47-63 Hz line voltage input through 3 pin IEC320
receptacle
Output Voltage
24 VDC, 18W, 0.75A; Adapter powers a system of up to three bars (any
length), with one communication module (CI), and one hardwired Man-
Machine Interface control (MMI); RJ-11 adapter and modular cable
included
Certifications RoHS 2 Compliant
scorpION3 MMI Module Remote
Output IR (infrared) and hardwired RS-485
Controls Up Arrow/Down Arrow, Left Arrow/Right Arrow, Enter
Power On/Off Slide Switch
Indicators
LCD menu driven user interface green/red LEDs indicate transmit/receive/
fault status
Power
Standard 9V battery (Type 1604, Alkaline) or 24 VDC, 50 mA from bar
system chain (RJ-11 modular connectors) CAUTION: Risk of explosion
if battery is replaced by an incorrect type. Dispose of used batteries
according to the manufacturer’s instructions.
Enclosure Impact resistant ABS
Dimensions 4.40H x 7.70W x 1.25D in. (110 x 196 x 32 mm)
Weight 0.75 lb (0.34 kg) with battery
To Next Page
Loading...