DRAFT D
TNM-M-E-0001 Page 7
The customer undertakes not to disclose any part of the software to third parties without the
Company's written consent, nor to copy or modify any software. The Company may, at its
discretion, carry out minor modifications to software. Major modifications may be undertaken
under a separate agreement, and will be charged separately.
All software is covered by a warranty of 3 months from delivery, and within this warranty period
the Company will correct errors or defects, or at its option, arrange free-of-charge replacement
against return of defective material.
Other than in clause above, the Company makes no representations or warranties, expressed
or implied such, by way of example, but not of limitation regarding merchantable quality or
fitness for any particular purpose, or that the software is error free, the Company does not
accept liability with respect to any claims for loss of profits or of contracts, or of any other loss of
any kind whatsoever on account of use of software and copies thereof.
2.4 Adjustment and Alignment
There are no internal adjustments in the SRM9000. Re-programming and alignment is done
with the unit installed using software tools. For servicing, the radio PCB can be operated as a
stand alone unit provided a temporary heatsink is fitted under the transmitter PA module for
transmitter servicing and that the receiver audio output be kept below 100mW for receiver
servicing. Radio performance is not adversely affected by operating without the outer sleeve but
there will be some change to performance when the metal cans are removed from the RF
sections of the board.
To Next Page
Loading...
Need help?
General
