2.1 Power the Transmitter (Ref. Fig 2-1)
Power adapter
2.2 Turn on the Transmitter (Ref. Fig 2-2)
Slide OFF/ON switch to “ON” position.
Transmitter
Two ways to power the receiver:
Note: please charge the battery for 3 hours before the first use.
1) Load the Li-battery into the battery chamber of the receiver with correct
polarity and cover the battery case.(Ref. Fig 2-3)
2) Use the additional power adapter to power the receiver.(Ref. Fig 2-4)
Other RCA
jacks(usually
audio in)
AUDIO IN
(need extra 6.35mm
to 3.5mm adapter,
purchase separately)
(need extra digital to
analog converter,
purchase separately)
Digital AUDIO OUT
COAXIAL
Jack
Options
Natively
supported?
Please refer
to Point
6.35mm
Phone jack
PHONE
3.1
AUX/3.5mm
3.3
RCA jacks
labled
AUDIO OUT
R
L
AUDIO OUT
3.2
N/A
3.4 3.4
Fig 1-1
2.Turn on the Transmitter and Receiver
Plug the supplied AC adapter into a standard electrical outlet, plug the other end
of the AC adapter into the port labeled “DC 9V” on the back of the transmitter.
2.3 Power the Receiver
2.4 Turn on the Receiver
Rotate the big Volume knob clockwise until you hear a short "click".
Fig 2-1
Fig 2-2
Battery chamber
Cover
Fig 2-3
Fig 2-4
06
07
OPTICAL
3.1 RCA Analog Connection
This part will explain how to connect the SIMOLIO SM-621 transmitter to
your television, satellite, or cable box using an RCA analog audio cable.
• If you cannot get to the back of your TV and you only watch the programs
through a fixed TV box (cable/satellite box/DVD etc.), you can also use these
instructions to install the system to your TV box.
SM-621
SM-621
3. Connect the Transmitter to Your TV/Audio Source
Set the volume of the audio source to a level sufficient for people with normal
hearing to clearly listen to the TV to ensure stable audio output.
i.e. set the TV box VOL ≥ 30 % & TV VOL ≥ 40% (Ref. Fig 3-1) (Ref. Fig 3-2)
For watching TV quietly without disturbing others, the right way is: Mute your
TVby pressing the MUTE button on the remote control or choose any speaker
option other than TV Speaker in the TV Sound Output settings.(Ref. Fig 3-3)
• The above settings may differ from various TVs.
TV box VOL ≥ 30 %
Fig 3-1
Mute
Fig 3-3
TV VOL ≥ 40 %
Fig 3-2
• Be aware that the base should be placed at least 4 feet away from your Router/
smart WiFi TV/TV sticks/WiFi TV box to avoid interference.
Step 1. Hook up SIMOLIO to the RCA Audio Out Port of the TV/other
Audio Device