10
11
Fig 3-9
Fig 3-10
H/
P o
r
A
u
d
i
o O
u
t
Speakers
Internal speakers
External speakers
Headset
a wired headphone/
earphone
94dB 85dB 75dB
volume
L
Notes:
* Your TV’s audio settings may be set to “Variable”
or “Fixed”. We recommend that you set your audio
settings to “Fixed” for better audio quality when
using this installation option. If you want to be able
to control your TV volume level separate from your
SIMOLIO SM-621 volume level, you will need to
make sure your TV is set to “Fixed”. Contact your
TV manufacturer for assistance.
* Setting menu may be different depending on different TV brands and models.
Fig 3-11
SETTINGS
ANALOG AUDIO OUT
VARIABLE
FIXED
SOUND / AUDIO
• Ensure TV Audio Format is set to “PCM” or “Dolby/DTS” is OFF (This is
IMPORTANT, Ref. Fig 3-13)
PS: for certain smart Samsung models, the TV is retaining separate settings
for regular TV and internet TV setup. When you turn to the Smart Hub for
Internet source, please use the TV remote to go to Settings > Sound > Expert
Settings > Audio Format or Digital Output Audio Format, then select PCM.
• Ensure your TV speaker is set to “External Speakers”. (Ref. Fig 3-14
RCA
OUT
L
R
OPTICAL or COAXIAL IN
Connect TV/
Cable box/
STB etc.
RCA Audio Cable
OPTICAL or COAXIAL IN
Connect TV/
Cable box/
STB etc.
Fig 3-13
Fig 3-14
Fig 3-15
• Take turns to test RCA connection and 3.5mm /AUX connection.
Speakers
Internal speakers
External speakers
Headset
Settings
Audio Format
Dolby Digital
DTS
DTS Neo 2:5
PCM
H/P
L
R
L
94dB
85dB 75dB
volume
or
• Use a wired headphone/earphone to plug into the headset port or RCA
output of the DAC to test if you can hear the TV sound. (Ref. Fig 3-15)
L
94dB
85dB
75dB
volume
3.5mm Audio Cable
SM-621
SM-621
1) TV/Audio Source only has Digital Optical or Coaxial Audio Out port
3.3 Other Connections in Special Cases
Step 1. Purchase a Digital to Analog Converter and Set up as Shown in
Fig 3-12
wireless
transmitter
Digital
Audio Out
AUDIO IN
Digital to Analog Converter
RCA OUT
L
R
OPTICAL or COAXIAL IN
Fig 3-12
Step 2. TV Audio Format and TV Speaker Setting (use TV remote control)
If you can not hear sound from your speaker after connecting:
If your TV/Audio Source only has a digital optical or coaxial audio out port,
you will need a digital to analog converter (DAC) for installation.
Note:
Setting menu may be different depending on different TV brands and models.
2) Use SIMOLIO SM-621 to your AV Receiver with 6.35mm PHONE jack
Step 1. Purchase a 6.35mm to 3.5mm Adapter and Set up as Shown
in Fig 3-16
SM-621 is not compatible with ANY RCA(L/R) ports on your AV Receiver,
ONLY use the BIG 6.35mm PHONE OUT on front side of your AV Receiver
with the 6.35mm to 3.5mm adapter (purchase separately).
To Next Page
Loading...
