EasyManua.ls Logo

SIMOLIO SM-621 - TONE Adjustment; Use Two Sets of SIMOLIO 2.4 GHz Wireless TV Speakers Simultaneously in the Same House

SIMOLIO SM-621
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TONE
(Treble / Normal / Bass)
Turn on the receiver and set the
VOLUME to your required level.
Select TONE (Treble / Normal /
Bass)to hear more clearly. Select
Treble to enhance female voice
and child’s voice, select Bass to
enhance male voice.
• Use the 6.35 to 3.5mm converter to plug a wired headphone/earphone into
the port on AV receiver to check whether the sound is normal.
Step 2. Check the Performance of the AV Receiver's Audio Output as
Shown in Fig 3-17
Pho nes
AV Receiver
6.35mm Audio adapter
(purchase separately)
3.5mm Audio Cable
6.35mm Phone jack
Fig 3-16
Fig 3-17
AV Receiver
6.35mm Audio adapter
(purchase separately)
3.5mm Audio Cable
6.35mm Phone jack
If you can not hear sound from your speaker after connecting:
Phones
A
U
D
IO I
N
94dB 85dB
75dB
volume
L
6.1 How to Use the Stethoscope Headset with the Speaker
Follow the transmitter connection as part 3 on page 8~11, connect the
stethoscope headset or your own headset to the AUDIO OUT jack at the rear
of the , you can turn an ordinary headset into a wireless TV headset
to enjoy TV without the speaker voice disturbing your family. If you want to
watch TV quietly alone, you can click your TV remote
controller to OFF the TV internal speakers .
speaker
MUTE key at
4. TONE Adjustment
Fig 5-1
• The two sets of SIMOLIO SM-621 should be put at least 10 meters away
from each other when using them simultaneously.
5.Use Two Sets of SIMOLIO 2.4GHz Wireless TV Speakers
Simultaneously in the Same House
room 1 room 2
SM-621
(Transmitter 2)
SM-621
(Transmitter 1)
Distance >10M (at least)
6. Other Uses
Fig 4-1
12
13
Note: If two s are used on the same TV,
only one transmitter needs to be connected,
because one transmitter supports multiple
s to work simultaneously.
speaker
speaker
• Put the speaker on the transmitter base, then
turn on the transmitter and the speaker, wait for
a while until you hear sound from the speaker,
then you can take the speaker away to listen.
Plug in
TV
Fig 5-2
SM-621
SM-621
Fig 6-1
AUDIO OUT
TV
Note: please turn the dial knob at the speaker for headset’s volume
adjustment.

Related product manuals