2
20. Do not fill water including soup ingredients over two-thirds of utensil volume when boiling water or
soup. Spilled liquid of boiling will affect combustion and damage the appliance.
21. When the appliance is operating at low flame, do not open underneath cabinet door rapidly; otherwise,
flame may be extinguished by air draught.
22. Always use pots with covers and make sure that the handles of the pots are correctly positioned to avoid
heating and collision of handles.
23. Do not use sprays near the appliance.
24. All knobs should be turned to off position after use.
25. Do not clean the top plate when the appliance is hot.
26. Pan support gets hot after usage. Clean after cooling down.
27. The top panel of appliance is made of tempered glass which is safer than normal glass for this
application. However, the following safety precautions should be noted in order to prevent the glass top
panel from breaking:
Clean the burner frequently to maintain a clear gas passage of flame holes. Clean and tidy up the
burner after spillage of food and liquid once the appliance cools down.
If abnormal noise is observed, turn off flame. Check placement of burner caps and place them
correctly after appliance cools down. Contact Towngas Company if problem persists.
Do not scratch or impact the glass top plate with hard objects.
Do not place heavy objects or place cooking utensils on the glass top plate.
Maintenance
1. Check condition of gas hose regularly. Ensure that it is free from kink or crack. Contact Towngas
Company to replace it if damage is found.
2. Allow the appliance to cool down completely before cleaning.
3. Wear glove to protect the hands from cut injury when cleaning the appliance. Do not touch any internal
parts of the appliance.
4. Dry burner cap and burner body completely with dry cloth after washing. Flame holes of burner must be
free from water lest combustion is affected.
5. Before and after use, notice the condition and cleanliness of burner. The following abnormal conditions
will incur abnormal combustion and thus damage of the appliance. Ensure undertaking measures to
rectify the problem accordingly.
Important Safety Instructions
Abnormal Condition Handling Measure
Burner cap and burner body are deformed Contact Towngas Company to replace the parts.
Burner cap and burner body are tilted
Replace burner cap and burner body properly.
Burner cap and burner body must not be tilted.
Burner flame holes are blocked by water
Dry burner cap and burner body with cloth and
replace them properly.
Burner flame holes are blocked by dirt
Clean burner cap and burner body with mild
detergent and brush. Ensure that they are wiped
dry before replacing them.
To Next Page
Loading...