Why does my SIMPA Water Heater fan keep operating without use of hot water?
After the burner is closed in your SIMPA Water Heater, the combustion fan will keep operating for a short period of time. This is a normal phenomenon.
Why does the hot water turn milky with a cloudy status in my SIMPA RS11TM Water Heater?
The milky or cloudy appearance of hot water from your SIMPA Water Heater is due to dissolved air in the water being released as bubbles when heated, which is normal.
What does it mean if water is discharged momentarily from the outlet of pressure relief valve in my SIMPA RS11TM?
If the water pressure inside your SIMPA Water Heater exceeds the design pressure, the pressure relief valve near the hot water outlet will open to release pressure. It will close once the pressure reduces to the designed level.
What should I do if the ON/OFF indicator does not light up on my SIMPA Water Heater?
Check if the power supply to your SIMPA Water Heater is normal.
Explains danger, warning, caution symbols and general safety guidelines.
Covers gas leaks, child safety, installation rules, and flue terminal placement.
Focuses on fire prevention, proper use, and avoiding scalding.
Details safe cleaning, maintenance, and control unit operation.
Describes the control panel, indicators, and temperature display.
Covers initial use, cautions, and basic operating steps.
Guidelines for cleaning, shower head care, and regular inspection.
Addresses fault codes, water supply problems, and operational faults.
Details models, dimensions, power, safety devices, and accessories.
General| Brand | SIMPA |
|---|---|
| Model | RS11TM |
| Category | Water Heater |
| Language | English |
To Next Page
