Simplex 500 User Manual

• Daylight saving time is not pre-set at the factory (with the indication
of month 00 and day 00).
• The D.S.T. button stays lit up during its setting operation.
1 Press SELECT to cause the fourth button from the left, D.S.T. , to light up.
2 Setting the start date
"01" is indicated at the upper left of the display during setting of the start date.
(1) Press or to cause digits to flash, and then press or to select the
desired time.
Example: If your D.S.T. starts on March 25, 2001, adjust the digits to "01-03-25".
(2) Check the settings on the display and press SET . Now the setting is completed.
DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
SU12Hr. TU SAFRTHWEMO
1/60
1/100
Start date of D.S.T.
DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
SU12Hr. TU SAFRTHWEMO
1/60
1/100
16

Simplex 500 Specifications

General

Brand	Simplex
Model	500
Category	Clock
Language	English