Simplicity 1690846 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Adjustments

Procedures for adjusting steering components and linkage.

Neutral

Adjusting transmission control linkage for accurate neutral positioning.

Spring-Centered Lever

Forward Travel Stop

Adjusting bolt to limit maximum forward speed output of hydro pump.

Reverse Travel Stop

Adjusting set collar to control maximum reverse speed of hydro pump.

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Neutral Adjustment (Early Model Only)

Adjusting controls to prevent tractor movement in neutral.

Late Models - Early Models with 1686602 kit installed

Return-to-Neutral Adjustment - Hydro

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 750 or 751 Transaxles

Neutral Adjustment Early Models with Welded Support Bracket

Neutral Adjustment Later Models with Plastic Bracket

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10 S Transaxle

Neutral Adjustment - (Linkage with two ball joints)

Neutral Adjustment - (Linkage with one ball joint)

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500;322-0500;322-0650 Transaxle (With Foot Control)

Forward Speed Adjustment

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusting shift lever for neutral gate positioning.

Return to Neutral Adjustment

Simplicity 1690846 Specifications

General

Brand	Simplicity
Model	1690846
Category	Tractor
Language	English