Simplicity 1691807 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Summary

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Neutral Adjustment (Early Model Only)

Neutral adjustment procedure for early models of specific tractors.

Late Models - Early Models with 1686602 kit installed

Section 4. (Continued) Tractors with HydroGear 216-3010 L Hydrostatic Transaxle

Return-to-Neutral Adjustment - Hydro

Adjusting the shift lever return to neutral when the pedal is depressed.

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Tractors with HydroGear 311-0750;311-0800 Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 751 Hydrostatic Transaxle

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10 S Transaxle

Neutral Adjustment - (Linkage with two ball joints)

Neutral Adjustment - (Linkage with one ball joint)

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Adjusting return-to-neutral function for HydroGear 310 transaxles.

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500;322-0500;322-0650 Transaxle (With Foot Control)

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusting the shift lever for neutral position on mid-engine mowers.

Return to Neutral Adjustment

Simplicity 1691807 Specifications

General

Engine	Briggs & Stratton
Fuel	Gasoline
Transmission	Hydrostatic
Drive	2WD
Engine Type	Single-cylinder