Simplicity 1691931 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Neutral Adjustment (Early Model Only)

Adjusts transmission for early models to prevent creep.

Neutral Adjustment (Late Models)

Adjusts transmission for late models with kit.

Return-to-Neutral Adjustment - Hydro

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10 S Transaxle

Neutral Adjustment (Hand Control)

Adjusts transmission to prevent tractor creep.

Return-to-Neutral Adjustment

Neutral Adjustment - Linkage with two ball joints

Adjusts linkage to prevent tractor creep.

Neutral Adjustment - Linkage with one ball joint

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500;322-0500;322-0650 Transaxle (With Foot Control)

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusts shift lever to prevent forward/reverse movement.

Return to Neutral Adjustment

Simplicity 1691931 Specifications

General

Brand	Simplicity
Model	1691931
Category	Tractor
Language	English