Simplicity 1691271 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Summary

Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer and Neutral Adjustments

Adjusts steering linkage, neutral position, and transmission speed variation.

Travel Stop Adjustments

Sets maximum forward and reverse speeds for hydro pumps.

Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Tractors with Tuff Torq K215-A & HydroGear BDU-21 L

Neutral Adjustment (Early Models)

Procedure for adjusting neutral on early models of this tractor type.

Neutral Adjustment (Late Models with Kit)

Procedure for adjusting neutral on late models with specific kit installed.

Tractors with HydroGear 216-3010 L Hydrostatic Transaxle

Tractors with Eaton 850 Transaxle

Tractors with Tuff Torq K60 Hydrostatic Transaxle

Tractors with HydroGear 311-0750;311-0800 Transaxle

Lawn Tractors with Eaton 750 Hydrostatic Transaxle

Neutral Adjustment (Early Models with Welded Support Bracket)

Neutral Adjustment (Later Models with Plastic Bracket)

Lawn Tractors with Eaton 751 Hydrostatic Transaxle

Lawn Tractors with HydroGear Sundstrand BDU10 S Transaxle

Neutral Adjustment (Two Ball Joints)

Neutral Adjustment (One Ball Joint)

Lawn Tractors with HydroGear 310-0500 (Hand Control)

Return-to-Neutral Adjustment

Lawn Tractors with HydroGear 318-0500;322-0650 Transaxle (Foot Control)

Forward Speed Adjustment

Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Procedure to adjust the shift lever if it moves out of neutral gate to prevent movement.

Return to Neutral Adjustment

Simplicity 1691271 Specifications

General

Brand	Simplicity
Model	1691271
Category	Tractor
Language	English