Simplicity 1692420 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1692420 Specifications

General

Brand	Simplicity
Model	1692420
Category	Tractor
Language	English

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Adjustments

Adjustments for steering wheel centering and transmission control linkage alignment.

Spring-Centered Lever Adjustment

Forward Travel Stop Adjustment

Reverse Travel Stop Adjustment

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic.

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Neutral Adjustment (Early Model Only)

Adjusting shift rod and speed control lever to achieve neutral position for early models.

Late Models - Early Models with 1686602 kit installed

Return-to-Neutral Adjustment - Hydro

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10 S Transaxle

Neutral Adjustment - (Linkage with two ball joints)

Adjusting linkage to prevent forward/back creep with transmission in neutral.

Neutral Adjustment - (Linkage with one ball joint)

Adjusting linkage to prevent forward/back creep with transmission in neutral.

Return-to-Neutral Adjustment

Forward Speed Adjustment

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusting front hydro control rod to prevent forward/reverse movement in neutral.

Return to Neutral Adjustment