EasyManua.ls Logo

Simplicity 1692456 User Manual

Simplicity 1692456
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
(Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.
Question and Answer IconNeed help?

Do you have a question about the Simplicity 1692456 and is the answer not in the manual?

Simplicity 1692456 Specifications

General IconGeneral
EngineBriggs & Stratton
TransmissionHydrostatic
Cutting Width42 inches
Cutting Height1.5-4 inches
Tire Size - Front15x6.00-6

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic.

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (HydroGear 216-3010L)

Adjusts shift lever to prevent movement when in neutral gate.

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. Tractors with HydroGear 311-0750/311-0800 Transaxle

Section 6. Lawn Tractors with Eaton 750 or 751 Transaxles

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Neutral Adjustment - (Linkage with two ball joints)

Adjusts linkage to prevent tractor creep in neutral.

Neutral Adjustment - (Linkage with one ball joint)

Adjusts linkage to prevent tractor creep in neutral.

Section 7. Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Section 7. Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Neutral Adjustment

Adjusts the hydro control rod for proper neutral positioning.

Related product manuals