Simplicity 1692073 User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1692073 Specifications

General

Transmission	Hydrostatic
Drive Type	2WD
Turning Radius	18 inches
Engine	Briggs & Stratton
Engine Type	Single-cylinder, OHV

Summary

Introduction

General Safety Warnings

Provides safety precautions for operation and maintenance.

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Neutral Adjustment

Adjusts steering wheel alignment and neutral position.

Wheel-Steer Neutral Adjustment (Continued)

Further adjustment for transmission control linkage neutral position.

Forward Travel Stop

Reverse Travel Stop

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (Early Model Only)

Adjusts speed control lever for neutral on early models.

Neutral Adjustment (Late Models / 1686602 Kit)

Adjusts neutral position for late models or with kit.

Neutral Adjustment (HydroGear 216-3010L)

Adjusts shift lever to prevent forward/reverse movement.

Return-to-Neutral Adjustment (Hydro)

Section 6. (Continued) Tractors with HydroGear 311-0750/311-0800 Transaxle

Neutral Adjustment (HydroGear 311-0750/0800)

Adjusts shift lever to prevent forward/reverse movement.

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Neutral Adjustment (HydroGear 310 - Hand Control)

Return-to-Neutral Adjustment

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Neutral Adjustment (HydroGear 318/322-0500/0650)

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusts hydro control rod to prevent rider movement.

Return to Neutral Adjustment