Simplicity 1692776 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1692776 Specifications

General

Engine	Briggs & Stratton
Cylinders	1
Fuel	Gasoline
Transmission	Hydrostatic
Drive	2WD
Drive Type	2WD
Turning Radius	18 inches
Tire Size (Front)	15x6-6
Tire Size (Rear)	20x8-8

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Neutral Adjustment

Neutral Adjustment (Linkage)

Adjusting transmission control linkage for exact neutral.

Forward Travel Stop

Reverse Travel Stop

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Neutral Adjustment (Early Model Only)

Adjusting early models for neutral position.

Late Models - Early Models with 1686602 kit installed

Return-to-Neutral Adjustment - Hydro

Ensuring shift lever returns to neutral when pedal is depressed.

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 750 or 751 Transaxles

Neutral Adjustment (Early Models)

Adjusting early 750 models for neutral position.

Return-To-Neutral (Early Models)

Neutral Adjustment (Later Models)

Adjusting later 750 models with plastic bracket for neutral.

Neutral Adjustment (Eaton 751)

Adjusting Eaton 751 models for neutral position.

Section 7. Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Ensuring lever returns to neutral with hand control.

Section 7. Lawn Tractors with HydroGear 318-0500;322-0500;322-0650 Transaxle (With Foot Control)

Forward Speed Adjustment

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusting for rider movement when lever is in neutral.

Return to Neutral Adjustment