EasyManua.ls Logo

Simplicity 1692279 - User Manual

Simplicity 1692279
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
(Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.
Question and Answer IconNeed help?

Do you have a question about the Simplicity 1692279 and is the answer not in the manual?

Simplicity 1692279 Specifications

General IconGeneral
BrandSimplicity
Model1692279
CategoryTractor
LanguageEnglish

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Neutral

Adjusting transmission control linkage for exact neutral position of drive wheels.

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Neutral Adjustment - Early Models

Adjusting speed control lever and ball retainer for early models.

Neutral Adjustment - Late Models with 1686602 Kit

Procedure for neutral adjustment on models with a specific kit installed.

HydroGear 216-3010 L Transaxle Neutral Adjustment

Adjusting shift lever to prevent tractor movement in neutral gate.

HydroGear 216-3010 L Transaxle Return-to-Neutral Adjustment

Ensuring shift lever returns to neutral when clutch/brake pedal is depressed.

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

HydroGear 311-0750;311-0800 Transaxle Neutral Adjustment

Adjusting shift lever to prevent movement in neutral gate.

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10 S Transaxle

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusting shift lever and hydro control rod for neutral position.

Related product manuals