Simplicity 1692354 User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1692354 Specifications

General

Type	Lawn Tractor
Transmission	Hydrostatic
Drive Type	2WD
Engine	Briggs & Stratton
Cutting Width	42 inches
Engine Type	Single Cylinder
Turning Radius	18 inches
Tire Size (Front)	15x6.00-6

Summary

Section 1. Commercial Front-Cut Riders with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Adjustments

Adjustments related to steering and neutral position for front-cut riders.

Forward Travel Stop

Limiting maximum forward output speed of hydro pumps.

Reverse Travel Stop

Controlling maximum reverse speed of hydro pumps.

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (Early Model Only)

Adjusting the neutral position for early model tractors.

Neutral Adjustment (Late Models/Kit)

Adjusting the neutral position for late models or specific kits.

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Tractors with HydroGear 311-0750/311-0800 Transaxle

Return-to-Neutral Adjustment

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Neutral Adjustment - (Linkage with two ball joints)

Neutral Adjustment - (Linkage with one ball joint)

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Neutral Adjustment

Adjusting the tractor's neutral position to prevent creeping.

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment