Simplicity 1692403 User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1692403 Specifications

General

Brand	Simplicity
Model	1692403
Category	Tractor
Language	English

Summary

Repair Information

Neutral Adjustments Overview

Procedures for adjusting the neutral position of hydrostatic drive tractor transmissions.

Section 1: Commercial Front-Cut Riders with Eaton Model 7 Hydrostatic

Neutral Adjustment (Wheel-Steer Linkage)

Ensuring transmission control linkage is correctly aligned for neutral position.

Section 2: Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Neutral Adjustment (Shaft Drive)

Procedure to correct tractor creep when speed control lever is in neutral.

Section 3: Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Neutral Adjustment (Belt Driven)

Correcting tractor creep when the hydrostatic control lever is in neutral.

Section 4: Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) BDU-21L

Neutral Adjustment (Early Models)

Adjusting neutral for early models of BDU-21L transmissions.

Section 4 (Cont.): Tractors with HydroGear 216-3010L Hydrostatic Transaxle

Neutral Adjustment (HydroGear 216-3010L)

Procedure to prevent forward/reverse movement when lever is in neutral.

Return-to-Neutral Adjustment (Hydro Gear)

Ensuring shift lever returns to neutral when clutch/brake pedal is depressed.

Section 5: Tractors with Eaton 850 Transaxle

Neutral Adjustment (Eaton 850)

Correcting tractor creep when the speed control lever is in the neutral gate.

Section 6: Tractors with Tuff Torq K60 Hydrostatic Transaxle

Neutral Adjustment (Tuff Torq K60)

Procedure to stop tractor creep when speed control lever is in neutral.

Section 6 (Cont.): Tractors with HydroGear 311-0750/311-0800 Transaxle

Neutral Adjustment (HydroGear 311-0750)

Preventing tractor movement when speed control lever is in neutral.

Return-to-Neutral Adjustment (HydroGear 311)

Section 6 (Cont.): Lawn Tractors with Eaton 750 Hydrostatic Transaxle (Welded Bracket)

Neutral Adjustment (Eaton 750 Welded)

Section 6 (Cont.): Lawn Tractors with Eaton 750 Hydrostatic Transaxle (Plastic Bracket)

Neutral Adjustment (Eaton 750 Plastic)

Section 6 (Cont.): Lawn Tractors with Eaton 751 Hydrostatic Transaxle

Neutral Adjustment (Eaton 751)

Section 7: Lawn Tractors with HydroGear BDU10S Transaxle (Two Ball Joints)

Neutral Adjustment (BDU10S, Two Ball Joints)

Section 7 (Cont.): Lawn Tractors with HydroGear BDU10S Transaxle (One Ball Joint)

Neutral Adjustment (BDU10S, One Ball Joint)

Section 7 (Cont.): Lawn Tractors with HydroGear 310-0500 Transaxle (Hand Control)

Neutral Adjustment (HydroGear 310 Hand Control)

Return-to-Neutral Adjustment (HydroGear 310)

Section 7 (Cont.): Lawn Tractors with HydroGear 318/322-0500/0650 Transaxle (Foot Control)

Neutral Adjustment (HydroGear 318/322 Foot Control)

Section 8: Lawn Tractors with Eaton Model 7 & Peerless 1300 Series Transaxle

Neutral Adjustment (Eaton/Peerless 1300)

Section 9: Later Model Front-Cut Riders with Eaton Model 7 Hydrostatic

Neutral Adjustment (Later Model Front-Cut)

Section 10: Early Model Front-Cut Riders with Eaton Model 7 Hydrostatic

Neutral Adjustment (Early Model Front-Cut)

Section 11: Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment (Mid-Engine)

Return to Neutral Adjustment (Mid-Engine)