Simplicity 1692416 User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1692416 Specifications

General

Brand	Simplicity
Model	1692416
Category	Tractor
Language	English

Summary

Introduction and Safety

General Warning

Keep hands, hair, clothing, and tools away from rotating belts to prevent serious injury.

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Neutral Adjustment

Lever-Steer Adjustments

Transmission Control Linkage Neutral Adjustment

Adjusts transmission control linkage for exact neutral position of drive wheels.

Spring-Centered Lever Adjustment

Forward Travel Stop Adjustment

Reverse Travel Stop Adjustment

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (Early Model Only)

Adjusts speed control lever and ball retainer for neutral position on early models.

Section 4. (Continued) Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (Late Models/Kit)

Performs neutral adjustment for late models or early models with a specific kit installed.

Section 4. (Continued) Tractors with HydroGear 216-3010L Hydrostatic Transaxle

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Lawn Tractors with HydroGear 311-0750 Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 750 or 751 Transaxles

Early Model 750 with Welded Support Bracket

Adjusts neutral for early Model 750 with a welded support bracket.

Section 6. (Continued) Lawn Tractors with Eaton 750 Hydrostatic Transaxle

Neutral Adjustment (Early Models)

Performs neutral adjustment for early models with a welded support bracket.

Neutral Adjustment (Later Models)

Section 6. (Continued) Lawn Tractors with Eaton 751 Hydrostatic Transaxle

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Neutral Adjustment (Linkage with two ball joints)

Section 7. (Continued) Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Neutral Adjustment (Linkage with one ball joint)

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Forward Speed Adjustment

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusts shift lever and hydro control rod for proper neutral rider movement.

Return to Neutral Adjustment