Simplicity 1691331 - User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1691331 Specifications

General

Brand	Simplicity
Model	1691331
Category	Tractor
Language	English

Summary

Introduction to Tractor Adjustments

General Safety Precautions During Adjustments

It is possible during adjustments to place yourself in a position which is more hazardous than when the unit is in normal operation.

General WARNING for Adjustments

When making adjustment, keep hands, hair, clothing, and tools away from rotating belts. Careless or improper attention may result in serious injury.

Section 1: Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Section 1: Wheel-Steer Adjustments

Section 1: Neutral Adjustment (Wheel-Steer)

Adjust steering wheel and transmission control linkage for correct neutral position of drive wheels.

Section 1: Neutral Adjustment (Linkage)

Adjust transmission control linkage on frame bracket to prevent wheel rotation in neutral.

Section 1: Forward Travel Stop Adjustment

Section 1: Reverse Travel Stop Adjustment

Section 2: Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 2: Neutral Adjustment

Adjust ground speed control lever and related components if tractor creeps in neutral.

Section 3: Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 3: Neutral Adjustment

Adjust pump control arm roller and control cam for correct neutral positioning to prevent tractor creep.

Section 4: Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Section 4: Neutral Adjustment (Early Model Only)

Adjust shift rod and ball retainer for correct neutral position of drive hub rotation.

Section 4. (Continued): Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21 L

Section 4: Late Models - 1686602 Kit Installation Adjustment

Section 4. (Continued): Tractors with HydroGear 216-3010 L Hydrostatic Transaxle

Section 4: Neutral Adjustment (HydroGear 216-3010 L)

Adjust front shift rod and rear shift rod lever to ensure neutral gate position prevents tractor movement.

Section 4: Return-to-Neutral Adjustment (HydroGear 216-3010 L)

Adjust return-to-neutral cam to ensure shift lever returns to neutral gate when clutch/brake pedal is depressed.

Section 5: Tractors with Eaton 850 Transaxle

Section 5: Neutral Adjustment

Adjust quadrant and speed control linkage to find exact neutral position where tires do not rotate.

Section 6: Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6: Neutral Adjustment (Tuff Torq K60)

Adjust shift rod lever and directional cam to align for proper neutral position and prevent tractor creep.

Section 6. (Continued): Tractors with HydroGear 311-0750;311-0800 Transaxle

Section 6: Neutral Adjustment (HydroGear 311)

Section 6: Return-to-Neutral Adjustment (HydroGear 311)

Section 7: Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Section 7: Neutral Adjustment (HydroGear 310)

Section 7: Return-to-Neutral Adjustment (HydroGear 310)

Section 7. (Continued): Lawn Tractors with HydroGear 318-0500;322-0500;322-0650 Transaxle (With Foot Control)

Section 7: Neutral Adjustment (HydroGear 318;322)

Section 7: Forward Speed Adjustment (HydroGear 318;322)

Section 7. (Continued): Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Section 7: Neutral Adjustment (HydroGear 310 - Cont.)

Section 7: Return-to-Neutral Adjustment (HydroGear 310 - Cont.)

Section 8: Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 8: Neutral Adjustment

Section 9: Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 9: Neutral Adjustment

Section 10: Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10: Neutral Adjustment

Section 11: Mid-Engine Riding Mowers with HydroGear 311-0500

Section 11: Neutral Adjustment

Section 11: Return to Neutral Adjustment