Simplicity 1690433 User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1690433 Specifications

General

Type	Lawn Tractor
Engine	Briggs & Stratton
Fuel	Gasoline
Drive	2WD
Transmission	Hydrostatic
Cutting Width	42 inches
Fuel Tank Capacity	2.5 gallons
Engine Type	Single-cylinder

Summary

Repair Information

Neutral Adjustments

Procedures for adjusting neutral position on hydrostatic drive tractors.

Section 1. Commercial Front-Cut Riders with Dual Eaton Model 7 Hydrostatic

Section 1. (Continued) Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Wheel-Steer Adjustments

Neutral

Ensuring the transmission control linkage is precisely in neutral.

Forward Travel Stop

Spring-Centered Lever

Reverse Travel Stop

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 2. (Continued) Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 3. (Continued) Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Section 4. (Continued) Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Neutral Adjustment (Early Model Only)

Adjusting neutral for early models of specific tractor series.

Section 4. (Continued) Tractors with HydroGear 216-3010L Hydrostatic Transaxle

Return-to-Neutral Adjustment - Hydro

Section 5. Tractors with Eaton 850 Transaxle

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Tractors with HydroGear 311-0750/311-0800 Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 750 or 751 Transaxles

Section 6. (Continued) Lawn Tractors with Eaton 750 Hydrostatic Transaxle

Section 6. (Continued) Lawn Tractors with Eaton 751 Hydrostatic Transaxle

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Neutral Adjustment - (Linkage with two ball joints)

Adjusting linkage for tractors with two ball joints.

Neutral Adjustment - (Linkage with one ball joint)

Adjusting linkage for tractors with one ball joint.

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Return-to-Neutral Adjustment

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Neutral Adjustment

Adjusting the shift lever to prevent forward or reverse movement.

Return to Neutral Adjustment