Simplicity 1690429 User Manual

How to use this file...(Labels & Miscellaneous Documents)
————————————————————————————————————————————–––
Instructions for
Print Vendors (Paper Manuals)
Paper: * Various...
Press: * Various...
Bindery: * Various...
General: * This instruction page is NOT part of the document and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
• THIS document will most likely be a unique piece -- either a label or certificate or
other such miscellaneous format.
• EXACT specifications on the print & job specs should already be known to
you. In you are uncertain of what these specifications are, please contact
Simplicity Technical Publications.
• (Note: We will do our best to answer your questions concerning this job, but may need to transfer
you to another department within our company for additional specifications and job
requirements).
————————————————————————————————————————————–––
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department at (262) 284-8647.

Simplicity 1690429 Specifications

General

Brand	Simplicity
Model	1690429
Category	Tractor
Language	English

Summary

Section 1. Commercial Front-Cut Rider with Dual Eaton Model 7 Hydrostatic

Section 1 Neutral Adjustment

Adjusting transmission control linkage for exact neutral position.

Section 1 Spring-Centered Lever Adjustment

Adjusting control levers to automatically return to neutral.

Section 1 Forward Travel Stop Adjustment

Limiting maximum output speed of hydro pump for straight travel.

Section 1 Reverse Travel Stop Adjustment

Controlling maximum reverse speed using a set collar.

Section 2. Large-Frame Tractors with Shaft Drive - Sundstrand Model 15 Hydrostatic (Peerless 2600-002 or 2600-008)

Section 2 Neutral Adjustment

Adjusting ground speed control for neutral position if tractor creeps.

Section 3. Large-Frame Tractors with Belt Driven - Sundstrand Model 15 Hydrostatic

Section 3 Neutral Adjustment

Adjusting hydrostatic control lever for neutral position if tractor creeps.

Section 4. Tractors with Tuff Torq K215-A & HydroGear (Sundstrand) Hydrostatic, BDU-21L

Section 4 Early Model Neutral Adjustment

Adjusting speed control lever for neutral in early models.

Section 4 Late Models Neutral Adjustment

Neutral adjustment for late models or those with specific kit.

Section 4 Hydro Control Linkage Neutral Adjustment

Adjusting shift lever for neutral position to prevent tractor movement.

Section 4 Return-to-Neutral Adjustment

Section 5. Tractors with Eaton 850 Transaxle

Section 5 Neutral Adjustment

Section 6. Tractors with Tuff Torq K60 Hydrostatic Transaxle

Section 6. (Continued) Tractors with HydroGear 311-0750/311-0800 Transaxle

Section 6 Neutral Adjustment

Section 6 Return-to-Neutral Adjustment

Section 7. Lawn Tractors with HydroGear (Formerly Agri-Fab) Sundstrand BDU10S Transaxle

Section 7 Neutral Adjustment (Two Ball Joints)

Section 7 Neutral Adjustment (One Ball Joint)

Section 7. (Continued) Lawn Tractors with HydroGear 310 - 0500 Transaxle (With Hand Control)

Section 7 Neutral Adjustment (Hand Control)

Section 7 Return-to-Neutral Adjustment

Section 7. (Continued) Lawn Tractors with HydroGear 318-0500/322-0500/322-0650 Transaxle (With Foot Control)

Section 7 Neutral Adjustment (Foot Control)

Section 8. Lawn Tractors with Eaton Model 7 Hydrostatic & Peerless 1300 Series Transaxle

Section 8 Neutral Adjustment

Section 9. Later Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 9 Neutral Adjustment

Section 10. Early Model Front-Cut Rider with Eaton Model 7 Hydrostatic

Section 10 Neutral Adjustment

Section 11. Mid-Engine Riding Mowers with HydroGear 311-0500

Section 11 Neutral Adjustment

Section 11 Return to Neutral Adjustment