Simplicity 5200 Series User Manual

Mower Installation & Removal
A. PTO Rod
B. Tractor PTO Arm
C. Spring Clip
REMOVAL
1. Place mower in lowest cutting height.
Lower the lift lever. Disengage the PTO
lever.
2. Remove the belt from the PTO pulley,
loosening belt stops as necessary.
3. Remove the spring clip (C, figure 6) and
pull PTO rod from hole. Reinstall the
spring clip in the rod for storage.
4. Unhook the lift chain (C, figure 2) from
the clevis (D).
5. Pull the safety clips from the hitch pins.
Push the pins out while holding mower
hitch up then allow mower to drop
down.
6. Turn the tractor wheels as far as they go
to the left.
7. Slide the mower out from under the
tractor from the right side.
7

Simplicity 5200 Series Specifications

General

Brand	Simplicity
Model	5200 Series
Category	Tractor
Language	English