Simplicity Conquest 2691338 - Air Filter and Spark Plug Service

Not for
Reproduction
16
11
7. Carefully remove the cap (B)and lower hose into an
approved container (C).
8. After the oil has drained, install the cap tightly, then attach
the hose to the side of the engine.
9. Remove the oil filter (B,Figure12) and discard.
12
10. Lightly lubricate the oil filter gasket (A)with clean oil.
11. Install the oil filter by hand until the gasket touches the oil
filter adapter (C)then tighten the oil filter 1/2 to 3/4 turns.
12. Add oil. See theCheck and Add Engine Oilsection.
Service Air Filter
Air Filter Assembly (Cartridge with pre-cleaner)
WARNING
DO NOT start or run the engine with the air cleaner
assembly or air filter removed as it is a fire hazard.

NOTICE
Do not use pressurized air or solvents to clean the filter.
Pressurized air can damage the filter, and solvents will
dissolve the filter.
1. Loosen the fasteners (A,Figure13) and remove the
cover (B).