EasyManuals Logo

Simplicity Regent Series User Manual

Simplicity Regent Series
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
33
Troubleshooting, Adjustment, & Service
WARNING
Any procedure other than the preceding could
result in:
(1) personal injury caused by electrolyte
squirting out the battery vents,
(2) personal injury or property damage due to
battery explosion,
(3) damage to the charging system of the
booster vehicle or of the immobilized
vehicle.
Do not attempt to jump start a vehicle having a
frozen battery because the battery may rupture or
explode. If a frozen battery is suspected, examine
all fill vents on the battery. If ice can be seen or if
the electrolyte fluid cannot be seen, do not
attempt to start with jumper cables as long as the
battery remains frozen.
WARNING
For your personal safety, use extreme care when
jump starting. Never expose battery to open flame
or electric spark – battery action generates
hydrogen gas which is flammable and explosive.
Do not allow battery acid to contact skin, eyes,
fabrics, or painted surfaces. Batteries contain a
sulfuric acid solution which can cause serious
personal injury or property damage.
When removing or installing battery cables, dis-
connect the negative cable FIRST and reconnect
it LAST. If not done in this order, the positive ter-
minal can be shorted to the frame by a tool.
To avoid engine damage, do not disconnect bat-
tery while engine is running. Be sure terminal
connections are tight before starting.
Figure 42. Battery Jump Starting Diagram
To
Starter
Switch
Starting
Vehicle
Battery
To Ground
To
Starter
Switch
Discharged
Vehicle
Battery
Engine
Block
THIS HOOK-UP FOR NEGATIVE GROUND VEHICLES
MAKE CERTAIN VEHICLES DO NOT TOUCH
Jumper Cable
Jumper Cable

Table of Contents

Other manuals for Simplicity Regent Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simplicity Regent Series and is the answer not in the manual?

Simplicity Regent Series Specifications

General IconGeneral
Engine BrandBriggs & Stratton
Cutting Width42 inches
Transmission TypeHydrostatic
Fuel Capacity3 gallons
Deck TypeStamped Steel
Turning Radius18 inches
Cutting Height1.5 - 4 inches
Warranty3 years

Related product manuals