8
Operation
Vacuuming carpet
• For carpet cleaning, press the “on / off”
switch on and press the “carpet” switch
on. Both lights should be lit.
Vacuuming hard surfaces
• For bare floor cleaning (i.e. tile, wood, or
linoleum), turn the main “on / off” button
on and the “carpet” switch to floor. Only
the “on / off” button light should be on.
Brushroll auto shut-off feature
Note: When the Synchrony is turned on
and in the upright position, the brushroll
will not spin as to eliminate the possibility of
damage to floor surfaces. The brushroll will
spin when the handle is lowered, provided
the “carpet” switch is on.
Press
Press
Press
Press
Carpet Cleaning Bare Floor Cleaning
(Wood, Tile, etc.)
To Next Page
Loading...
Need help?
General
