Simplicity Signature Series - Troubleshooting Chart - Performance; Unit Propulsion Issues; Snow Discharge Issues

20
Problem Look for Remedy
Worn scraper bar. Replace the scraper bar. See Replace the Scraper
Bar.
The unit does not propel. Incorrect adjustment of traction control cable. See Adjust the Auger and Traction Control Cable.
The auger control cable is out of adjustment. Adjust auger control cable. See Adjust the
Augerand Traction Control Cable.
Broken shear pin or shear bolt. Replace shear pin or bolt. See Replace the Shear
Pins or Shear Bolts.
The discharge chute is clogged. STOP THE ENGINE! Make sure that the auger
and impeller do not rotate. Use a clean-out tool to
remove the snow from the discharge chute. DO
NOT clean a clogged discharge chute with your
hands! See Clean a Clogged Discharge Chute.
The unit does not discharge snow.
Unwanted debris is lodged in auger. STOP THE ENGINE! Make sure that the auger
and impeller DO NOT rotate. Use a clean-out tool
to remove the unwanted debris. DO NOT remove
debris with your hands! See Clean a Clogged
Discharge Chute.
For all other issues, contact an Authorized Service Dealer.
Not for
Reproduction