25
Problem Solving Guide
Unclogging nozzle and hose
CAUTION: Disconnect the vacuum
cleaner from the electrical outlet before
cleaning nozzle housing.
The nozzle hose, located on the back
of the vacuum, carries the dirt from the
nozzle to the vacuum bag. The hose also
functions as the attachment cleaning hose.
First check to see that a bag is installed or
that the bag has not broken open.
If the hose should become clogged
• Pull out and turn the lid of the cleaning
attachment opening. Remove the clog or
blockage.
• Remove the hose cuff from the nozzle
inlet and check for clog.
• Turn unit over and remove bottom plate
(See “Removing and reinstalling bottom
plate”). Check the nozzle inlet tube for
obstructions. Clear tube and reinstall the
bottom plate.
Inlet Tube
To Next Page
Loading...
