SimpliFire SF-ALLP50-BK - Instructions Manual

1
SimpliFire • Boyd Build-Out Kit Instruction Manual • 2044-922 • 2/23
Boyd Build-Out Kit
BOK-MF-ALLP50, BOK-RTF-ALLP50
Model: SF-ALLP50-BK
- Instructions -
Tools and Supplies Needed
• Phillips Screwdriver (No. 3 preferred)
• Drill
• 5/32" or 4 mm Drill Bit
• 10 mm Socket or Nut Driver
• Level
• Stud Finder
ITEM DESCRIPTION QUANTITY
A Front Face 1
B Mantel Shelf 1
C Right Side 1
D Left Side 1
E Right Inner Panel 1
F Left Inner Panel 1
G Inner Top 1
H Top Ledger 1
I Lower Shelf 1
J Lower Ledger 1
B
K
G
H
F
D
I
E
J
N
A
M
L
C
O
ITEM DESCRIPTION QUANTITY
K Mantel Blocks 2
L Toe Kick Front 1
M Toe Kick Sides 2
N Shelf Support Blocks 3
O Wall Cleat 2
Kit Components
* BOK-MF-ALLP50, Modern
Farmhouse, model shown.
NOTICE: Before you start, the walls and oor in the area of the installation should be clean, plumb and level. Any major
deviation should be remedied before installing the Boyd Build-Out Kit.
Figure 1