20
Model # AXCJAG-09-N
1. Attach one of the mounting brackets securely to the back edge o f the furniture.
Use the shorter screw.
2. Determine where Furniture is to be placed and mark location o n the wall for mounting
bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into t h e hole and gently tap until the
flange on the anchor is against the wall surface.
4. Position the bracket over the anchor and use the longer screw t o securely attach the bracket
to the wall.
5. Place the furniture so the back edge is in line with the bracket o n t he wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
B r ing both ends together and slide the smooth side upright through the square-shaped
end and pull through to create the
“locked" position.
7. Check to make sure the strap is securely laced and locked to th e brackets.
DO NOT place heavy objects in top shelves.
DO NOT let children climb or hang on drawers. doors or shelves
X
√
X
√
X √
Furniture Tip Over Restraint Instructions:
FURNITURE TIP OVER RESTRAINT ASSEMBLY
To Previous Page
Loading...
