To Next PageTo Next Page
Need help?Do you have a question about the Simpson 13SIE-170 and is the answer not in the manual?
General| Power Source | Gasoline |
|---|---|
| Frame | Steel |
| Nozzle Type | Quick-connect |
| Nozzles Included | 0°, 15°, 40°, Soap |
| Tires | 10 in |
Safety information regarding chemicals known to cause cancer and reproductive harm.
Key safety guidelines for product assembly, operation, and installation.
Feature that stops the motor when the trigger is released.
Device that automatically shuts off the motor if it overheats or draws excess current.
GFCI protection built into the power cord plug for electric shock risk reduction.
Guidelines for servicing products with double insulation, requiring qualified personnel.
Details on the GFCI protection in the power cord plug and its function.
Step-by-step instructions for testing the Ground Fault Circuit Interrupter.
Recommendations for using outdoor-rated extension cords, including gauge and length.
Definitions of technical terms like PSI, GPM, and CU used in the manual.
Guide on selecting and using different spray wand nozzles for various cleaning tasks.
Instructions and safety precautions for swapping nozzles on the spray wand.
Instructions on how to fill, dispense, and flush the detergent tank.
Steps for connecting the high-pressure hose to the machine outlet.
Steps for connecting the garden hose to the machine inlet.
Procedure for attaching the spray wand to the spray gun.
Cleaning and lubricating connections for hoses, gun, and spray wand.
Instructions for cleaning nozzles to ensure performance and prevent clogging.
Cleaning and maintenance of the water inlet screen filter to protect the pump.
Procedures for draining, rinsing, and storing the unit for winter.
Details on which parts and labor are covered by the product warranty.
Specifies parts and conditions excluded from the warranty coverage.
Information on the duration and limitations of implied warranties.
Troubleshooting steps for when the pressure washer fails to dispense detergent.
Explains the expected detergent to water ratio and how to adjust it.
Solutions for issues related to circuit breakers tripping or fuses blowing.
Troubleshooting steps for a malfunctioning GFCI plug.
Diagnosing and fixing leaks in the spray gun, wand, or high-pressure hose.
Troubleshooting low pressure or motor not stopping when the trigger is released.
Identifying and resolving issues related to insufficient incoming water volume.
Solutions for when no water is dispensed from the nozzle.
Steps to take if the spray gun trigger is stuck or won't move.
Troubleshooting steps for when the pressure washer unit fails to start.
Diagnosing why the motor stops working during operation, often due to thermal overload.
Instructions on how to attach and detach the spray wand from the gun.
