13
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
45 S 508 D 45 S 551 D - 45 S 651 D
4. Select the desired option(s)
Depress one or more buttons depending on the
selected programme.
45 S 508 D 45 S 551 D
45 S 651 D
5. Select the temperature
Turn the dial to the required setting.
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
When closing the door, be careful not to trap fabric
between the door glass and the rubber gasket.
If the door is not correctly closed, the machine will
not operate.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked .
45 S 508 D 45 S 551 D - 45 S 651 D
To Next Page
Loading...
