NOTICE
Page 21
Turning o the water supply to your pump with the engine running will damage the pump.
Damage caused by running the pump without water is not covered under warranty. To
avoid this hazard always turn o the engine before shutting o the water supply.
PUMP DAMAGE
SHUTTING OFF THE ENGINE
2. Rotate the engine switch to the OFF position.
3. Turn o the water supply.
5. Allow the engine to cool completely before handling and storage.
1. Set the trigger lock on the spray gun.
4. Release the trigger lock then squeeze the spray
gun trigger to relieve the pressure in the hose and
pump.
To Next Page
Loading...
