EasyManua.ls Logo

Simpson SWT8542 - Washing Machine Care and Maintenance; Post-Wash Procedures; Cleaning the Lint Filter; Washing Machine Care and Maintenance (cont.)

Simpson SWT8542
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Rotate Selector knob to “Off” position.
Turn off power switch (For Models: SWT8542, SWT9542).
1.
Remove the softener dispenser cup and filter column from the centre of the agitator.
To clean the inside and outside of your washing machine you should:
Never use solvents, aerosol cleaners, spray pack cleaners,
glass cleaners, metal polishes, caustic materials, scourers
or general household cleaners on or near top panel and
lid, control panel or other parts of your washing machine.
IMPORTANT:
1.
Unclip the filter bag from the column.2.
Wipe the surface with a mild dishwashing detergent and warm water.1.
Wipe dry with a soft cloth.2.
Turn the bag inside out and remove the lint.3.
Wash the filter bag and dispenser cup in hot water.4.
Reassemble the filter to the column and place it back in the centre of the agitator.5.
How to clean the lint filter
2.
Switch off the electricity at the power point.
3.
Turn off the water taps.
4.
Leave lid open for a while to allow moisture inside washing machine to evaporate.
5.
Your washing machine will give you long and trouble-free service, if you follow the instructions in this sections.
These instructions show you how to care for your washing machine.
Lint is a collection of threads and fluff which comes off your clothes during washing. Your washing machine collects
this lint in the lint filter. It is important to clean out this lint filter preferably after each wash.

Related product manuals