Page 41
38 mm
(1.5 in)
66 mm
(2.6 in)
94 mm
(3.7 in)
46 mm
(1.8 in)
150 mm
(5.9 in)
162 mm
(6.4 in)
100 mm
(3.9 in)
79 mm
(3.1 in)
217 mm
(8.5 in)
25 mm
(1.0 in)
532 mm (21.28 in) Midstroke
250 mm (10.0 in)
150 mm (5.9 in)
180 mm (7.0 in)
7.6 Specification & Dimensions
AP14H SPECIFICATIONS
Supply Voltage 12v DC (10.8v-16v)
Average Power Consumption 3 Amps typically
Drive Output 15 Amps Max
Peak Flow Rate 1,000 cc/min (64 in
3
/min)
Peak Pressure 28 kg/cm
2
(1,000 psi, 67 bar)
Ram Capacity Min 90cc (5.4 in
3
)
Ram Capacity Max 250cc (15.25 in
3
)
AP14R SPECIFICATIONS
Supply Voltage 12v DC (10.8v-16v)
Average Power Consumption 0.7 Amps typically
Linear Thrust 175kg (385 lbs)
Max Torque 19.5Nm (170 lb/in)
Speed 15 rpm
Page 40
25 mm
(1.0 in)
65 mm
(2.56 in)
155 mm (6.33 in)
7.7 Service & Warranty
This unit is guaranteed for 2 years from date of retail sale. If it is necessary to have the unit
repaired, return it carriage prepaid to the agent in the country of purchase with a copy of the
receipted invoice showing the date of purchase. Where possible, return all the components unless
you are certain that you have located the source of the fault. If the original packing is not avail-
able, ensure that it is well cushioned in packing; the rigours of freight handling can be very differ-
ent from the loads encountered in the marine environment for which the unit is designed.
For Warranty details, please refer to the Warranty Card supplied with this unit.
To Next Page
Loading...
