Simrad CE44 ChartSounder - Page 169

CE34/44/54 ChartSounder Index
Key functions 2-3
-dedicated function keys 1-4
Key symbols in manual 1-2
Language 2-9,8-7
Light & contrast 2-8
Lines,
- delete all 7-10
- draw new line 3-15
- edit via chart 3-10,3-11
- edit via menu 7-10
- line list 7-9
- stored in the memory 7-9
Local time and date 8-5
Log 5-6,5-7
- reset 5-7
- speed calibration 8-13
Loran C 6-6
- list of Loran C chains 6-6
Maintenance 9-2
Master reset 8-24
Measurement units 8-7,A-2
- setup 8-7
Memory,
- delete 8-22
- used 8-22
Menu bar 2-5
Menu layout 2-6
Miscellaneous menu 6-1
MOB function back of front cover
- alarm and navigation 5-19
- check last activated MOB 5-19,7-15
- external switch 8-16
- turn MOB function off 5-19
Naming of routes, points, etc. 2-7
Navigation,
- advance to next point 3-14
- Approx.Velocity Necessary 5-10
- auto waypoint shift 5-3
- cursor navigation 5-14
- Estimated Time of Arrival 5-10
- examples 5-14
Navigation - continued,
- highway display 5-5
- orientation on chart 3-17
- restart to approaching point 3-14
- route navigation 5-16
- set & drift display 5-12
- setup 5-3
-
simulator (DeadReckoning) 8-11,A-2
- track navigation 5-17
- trim & highway display 5-11
- turn navigation off 3-14,5-15
- waypoint navigation 5-15
NMEA interface 8-9,A-2
- return to NMEA presets 8-22
Page system 2-1
- exchange a display 2-2
- exchange a page 2-2
- rotation inverval 8-7
Palette setup 8-21
PDOP limit 6-8
Pilot menu 5-1
- custom display 5-1,5-13
- ETA & AVN 5-10, A-1
- highway display 5-3,5-5
- NAV active 5-5
- NAV inactive 5-3
- shortcut to pilot serie 5-1
PLOT menu 3-15
- draw line 3-15
- make route 3-15
- plot ship’s position as WP 3-15
- plot target 3-15
- plot waypoint 3-15
- set vertical mark 3-15
Position
- display 5-6
- display setup 5-7
- flashing 5-6,A-2
- setup 8-5
- start 8-5
- update alarm 6-7,6-8
Power off 2-9
Power on 2-9