Simrad CE44 ChartSounder - Page 170

Index CE34/44/54 ChartSounder
QuickGuide 8-24
Repair and service 9-2
Routes,
- calculation 7-8
- delete all 8-22
- edit via chart 3-10,3-11
- edit via menu 7-4,7-5,7-6
- make new route from WP list 7-6
- menu 7-1
- navigation 5-16
- navigation setup 5-3
- plot new route 3-15
- route list 7-3
- stored in the memory 7-3
- time to go 7-8
Safety summary 1-2
Satellite status 6-7
Satellites in SDGPS system 6-13
- tracking state 6-13
Setup menu 8-1
Show test display 8-22
SimNet interface 8-9
- return to SimNet presets 8-22
Software version 8-7
Specifications 9-3
Speed,
- average 5-9
- diagram 6-3
- display as SOG/STW 8-7
- dual speed display 5-9
- filter 8-5
- over ground 5-6,6-4
- setup 8-7
- through water 5-9
Status indicator and accuracy 5-7
Symbols 2-7
Targets,
- delete all 8-22
- edit via chart 3-13
Targets - continued,
- plot new target 3-15
- setup / edit target 7-14,7-15
- stored in the memory 7-14
Track function 7-11
- auto trackpoint shift 5-3
- delete all 8-22
- display track 7-11
- edit via chart 3-12
- edit via menu 7-13
- interval 7-11
- line type 7-12
- navigation 5-17
- navigation setup 5-3
- start / stop track 7-11
- stored in the memory 7-12
- trackpoints 7-11
Troubleshooting 9-1
UTC time and date 5-6,8-5
Warranty end of manual
Waypoints,
- auto waypoint shift 5-3
- delete all 8-22
- edit via chart 3-9
- edit via menu 7-2
- menu 7-1
- navigation 5-15
- navigation setup 5-3
- plot new waypoints 3-15
- stored in the memory 7-1
- WP list 7-1
Wind display 6-1
- setup 6-2
- wind direction 6-1
- wind relative to the vessel 6-1
- wind speed, apparent or true 6-1
XTE - cross-track-error 7-4,7-8,5-5,A-3