Simrad forwardscan User Manual

|
1
ForwardScan | User Guide
Installation
Connecting the transducer
The ForwardScan™ transducer can be connected to the
StructureScan port on the SonarHub or the NSS evo2, leaving the
sonar port open for a CHIRP transducer. Refer to the ForwardScan
installation manual for transducer installation instructions.
Sonar performance
The accuracy of the sonar depth display can be aected by many
factors, including the type and location of the transducer and
water conditions. Never use this equipment to gauge depth or
other conditions for swimming or diving.
The choice, location, and installation of transducers and other
components of the system are critical to the performance of the
system as intended. If in doubt, consult your dealer.
To reduce the risk of misusing this equipment, you must read and
understand all aspects of the supplied documentation.
Sharing ForwardScan data
ForwardScan data can be shared with NSO evo2, NSS evo2 or
Zeus
2
displays by connecting the forward-looking transducer to a
SonarHub on your Ethernet network.
You can also connect the transducer to a NSS evo2 to share
ForwardScan data with multi-function displays on your Ethernet
network.
¼ Note: We do not recommend operating dierent brands of multi-
function displays on the same network.
Warning: Do not rely on this equipment as your principle
source of navigation or hazard detection.
ForwardScan™ Sonar
User guide
Warning: It is the owner’s sole responsibility to install and
use the equipment in a manner that will not cause accidents,
personal injury or property damage. The user of this product is
solely responsible for observing safe boating practices.

Simrad forwardscan Specifications

General

Brand	Simrad
Model	forwardscan
Category	Sonar
Language	English

Summary

Installation

Connecting the transducer

Connects the ForwardScan transducer to SonarHub or NSS evo2, referencing installation manual.

Sonar performance

Factors affecting sonar depth display accuracy and installation importance for performance.

Sharing ForwardScan data

How to share data with other displays via Ethernet network.

Operation and Display

ForwardScan navigational aid

ForwardScan acts as a navigational aid to monitor depth in front of the vessel.

Display key elements

Explanation of the elements shown on the ForwardScan display screen.

Accessing and Setup

Display modes and panels

ForwardScan can be displayed full screen or in a multi-panel page.

ForwardScan Configuration

Critical zone settings

User-selected thresholds for critical zone and alarm activation.

ForwardScan Installation settings

Configuration options for critical/warning ranges, depth, and transducer angle.

Chart Integration

Heading extension on chart

Using heading extension to monitor ForwardScan on the chart panel.

Heading extension alarm colors

Heading extension colors indicate ForwardScan alarm values.

Transducer and Settings

Transducer angle adjustment

Adjusting transducer angle for waterline offset and potential data distortion.

ForwardScan Options

Depth, range, and noise settings

Controls depth range, forward range, and noise rejection settings.

Record and Pause functions

Options to record ForwardScan sonar logs or pause transmissions.

View Options

Display palettes

Several display palettes available for different water conditions.

History ratio and point data

Controls screen usage for sonar history and data point display.

Zone and depth lines

Displays warning/critical zones and depth lines for estimation.