Simrad LOWRANCE TotalScan - Troubleshooting tips

Troubleshooting tips
Troubleshooting tips
Sonar data is not
displayed
• Check transducer cable is connected to
display unit
• Check sonar is enabled in display unit,
refer to display unit Operator manual
• Check transducer is submerged in the
water
No depth Check range or turn on auto range
Data washed out /
same color
Turn down contrast; try different palettes
Left/right data
swapped on screen
Toggle the Flip Left/Right feature
No source is
displayed
• Ensure the sonar is enabled in display
unit, refer to display unit Operator
manual
• Check transducer cable is connected to
display unit
7
18
Troubleshooting tips | TotalScan Transducer User
Manual