TotalScan Transducer mounting options
"Direct Step mount (Flush
bracket)" on page 10
Requires separately
sold Skimmer Flush
mount kit (part no.
000-12602-001)
• Transducer is not in the water when boat
is on plane; protects transducer and
prevents drag from transducer
• Transducer angle cannot be adjusted so
it is parallel with the water
• Sonar does not track bottom when
transducer comes out of the water
Transducer angle
After mounting the transducer, make sure the transducer is adjusted
so it will be parallel with the waterline in both the horizontal and
vertical axis when moving at trolling speed.
Transom and step mount (Transom
bracket)
The transducer can be mounted to the transom or step with the
transom bracket. With these mounting options the transducer can
8
Installation | TotalScan Transducer User Manual
To Next Page
Loading...
