Installation
Mounting options
The transducer can be mounted on the transom, jackplate, or step.
Use the following table to determine which mounting option is
best suited to your boat/installation preferences.
Ú
Note: Before drilling any holes, ensure that holes are drilled in a
safe position. Ensure you do not drill into tanks, reservoirs,
hoses, or cables, etc. and that the holes will not weaken the
structure in any way.
Ú
Note: When mounting the transducer, make sure there is
nothing around the mounting location that could interfere with
its sonar beams.
Ú
Note: If mounting where the transducer comes out of the
water, for example when the boat is on plane, the sonar will not
work while the transducer is out of the water.
1 Jackplate mount (Transom bracket)
Requires separately sold Skimmer Transom
mount kit (part no. 000-12603-001)
3
6
Installation | TotalScan Transducer User Manual
To Next Page
Loading...
