2 Direct Step mount (Flush bracket)
Requires separately sold Skimmer Flush mount kit
(part no. 000-12602-001)
3 Step mount (Transom bracket)
4 Transom mount (Transom bracket)
TotalScan Transducer mounting options
Transom mount
(Transom bracket)
Refer to "Transom and
step mount (Transom
bracket)" on page 8
• Keeps transducer in the water when the
boat is on plane, allowing you to track
bottom at high speeds
• Transducer angle can be adjusted so it is
parallel with the water
• Transducer more likely to collide with
obstructions in the water and adds drag
to the boat
Step mount
(Transom bracket)
Refer to "Transom and
step mount (Transom
bracket)" on page 8
• Transducer is not in the water when boat
is on plane; protects transducer and
prevents drag from transducer
• Transducer angle can be adjusted so it is
parallel with the water
• Sonar does not track bottom when
transducer comes out of the water
"Jackplate mount (Transom
bracket)" on page 12
Requires separately
sold Skimmer
Transom mount kit
(part no.
000-12603-001)
• Transducer is not in the water when boat
is on plane; protects transducer and
prevents drag from transducer
• Transducer angle can be adjusted so it is
parallel with the water
• Allows you to mount transducer without
drilling holes in your boat
• Sonar does not track bottom when
transducer comes out of the water
Installation | TotalScan Transducer User Manual
7
To Next Page
Loading...
