Simrad MX510 - Removing Waypoints

Keypad & Display Description | 43
Press the 5 EDIT key.
If you simply want to modify the waypoint, Edit this WPT will be displayed on the
bottom left of the screen.
To Lock all Waypoints
Press the
1 WPT key.
Scroll to the desired waypoint.
2
Press the 3 EDIT key.
Highlight the
4 More softkey and press ENT.
Highlight the
5 More softkey again and press ENT.
Highlight the 6 Lock all WPT softkey and press ENT.
Press the
7 EDIT key.
To Unlock all Waypoints
Press the
1 WPT key.
Scroll to the desired waypoint.
2
Press the 3 EDIT key.
Highlight the
4 More softkey and press ENT.
Highlight the
5 More softkey again and press ENT.
Highlight the 6 Unlock all WPT softkey and press ENT.
Press the
7 EDIT key.
Removing Waypoints
Unlocked waypoints can be overwritten manually or by waypoints received on the NMEA
port. Waypoints that are contained within a stored route can not be removed until they are
removed from the stored route in the RTE2 screen. If you try to remove a waypoint stored
in a route, a warning will be displayed indicating the first route a waypoint is stored in.
If the waypoint you want remove is locked, refer to the Waypoint Lock/Unlock section for
a step by step procedure, and then return to this section.
To remove a waypoint:
Press the
1 WPT key.
Scroll to the desired waypoint.
2
Press the 3 EDIT key.
Highlight the
4 Remove softkey then press ENT.