Simrad S5100 - Connecting to MFD Systems

Connecting the S5100 to MFD systems
The S5100 connects to your MFD system over the Ethernet network.
1
2
3
4
5
Unit socket (female)
2
3
1
4
5
Cable plug (male)
Key Purpose Color
1 Transmit positive TX+ Blue/White
2 Transmit negative TX- Blue
3 Receive positive RX+ Orange/White
4 Receive negative RX- Orange
5 Shield Bare
The illustration shows:
• how the S5100 connects to a single MFD (A), and how MFDs with two Ethernet
connectors can daisy chain (B) to share sonar data
• how sonar data from the S5100 can be shared by connecting the MFDs via a network
expansion port (C)
A
B
C
Wiring | S5100 Installation Manual
11