Simrad Shipmate RS8300 SD - Editing Scan Programme Memory

21
Edit of Scan Programme memory. Channels selected for Scan programme will
be retained in the memory of the set, even if power is switched off. When the
memory is full (ten channels), the first one entered is overwritten by the last one
entered.
13
10
1 3
INT
10
#
13 5 18
10
9 9
#
0
#
To insert new channels in the Scan Programme
memory, e.g. Channel 13.
To delete all channels stored in Scan Programme
memory.
Display the channels stored in Scan Programme
memory.