Need help?Do you have a question about the Simtronics GD10-P00 and is the answer not in the manual?
General| Brand | Simtronics |
|---|---|
| Model | GD10-P00 |
| Category | Other |
| Language | English |
Detection method, IR source, gases detected, self-test, calibration.
Lifetime stability, accuracy, response time, start-up time.
Early Dirty Optics, Dirty Optics, Detector failure conditions.
Standard/option output, HART® interface.
Power, temperature range, humidity, cable entry.
Compartment types, protection, material, weight, dimensions.
Location based on gas density, leakage, and maintenance access.
Fixing via screws or flange kit, orientation requirements.
Outdoor mounting and orientation of weather protection.
Using flange kit for airflow positioning in ducts or pipes.
External cable selection, connection terminals, and wiring.
Visual inspection of axis, wiring, grounding, and weather protection.
Procedure for powering up the detector and observing startup output.
Cleaning optics and performing function/calibration tests with gas.
4-20mA protocol, HART® version 7 support, DD requirements.
Connecting communicator, menu map, and detailed commands.
Setting fault options, PV units, zero trim, and loop test.
Cleaning optics and performing basic function tests with gas.
Calibration test and re-zeroing guidelines for trained operators.
Troubleshooting common issues using flowcharts and HART® commands.
Conformance to ATEX directive, general warnings, and safety information.
Specifications for cable glands, cables, and detector mounting orientation.
Overview of ATEX, IECEX, INMETRO, and CSA identification labels.
Accessing current gas readings and detector variables via commands.
Retrieving info, setting response time, and performing zeroing.
Fixed output tests and configuring fault levels using Hash Codes.
To Next Page