GD10P User Manual Page 3 of 44 850-811250-Rev.06b
Thank you for choosing this SIMTRONICS instrument.
All of the necessary actions have been taken in order to ensure your complete satisfaction with
this equipment.
It is important that you read this entire manual carefully and thoroughly.
Limitation of Liability
The Company SIMTRONICS A.S., hereinafter referred to as “SIMTRONICS” throughout this
document, shall not be held responsible for any damage to the equipment or for any physical
injury or death resulting in whole or in part from the inappropriate use or installation of the
equipment, non-compliance with any and all instructions, warnings, standards and/or
regulations in force.
No business, person or legal entity may assume responsibility on behalf of SIMTRONICS, even
though they may be involved in the sale of SIMTRONICS products.
SIMTRONICS shall not be responsible for any direct or indirect damage, or any direct or
indirect consequence, resulting from the sale and use of any of its products UNLESS SUCH
PRODUCTS HAVE BEEN SELECTED BY SIMTRONICS ACCORDING TO THE APPLICATION.
Ownership clauses
The drawings, specifications, and information herein contain confidential information that is
the property of SIMTRONICS.
This information shall not, either in whole or in part, by physical, electronic, or any other
means whatsoever, be reproduced, copied, divulged, translated, or used as the basis for the
manufacture or sale of SIMTRONICS equipment, or for any other reason without the prior
consent of SIMTRONICS.
Warning
This is not a contractual document. In the best interest of its customers and with the aim of
improving performance, SIMTRONICS reserves the right to alter the technical features of its
equipment without prior notice.
READ THESE INSTRUCTIONS CAREFULLY BEFORE THE FIRST USAGE: these instructions
should be read by all persons who have or will have responsibility for the use, maintenance,
or repair of the instrument.
This instrument shall only be deemed to be in conformance with the published performance
if used, maintained, and repaired in accordance with the instructions of SIMTRONICS by
SIMTRONICS personnel or by personnel authorized by SIMTRONICS.
To Next Page
Loading...